TENTRAX — D I M E N S I O N S
Tub and frame without wheels: 450 pounds. With tent and bed and both front racks: Approximately 600 pounds.
One center compartment that measures: 45”L x 33”W x 19”H when a Tent and Bed is installed with any model. The Height is increased to 25 inches without the Tent and Bed. There is also two side compartments that measure: 45”L x 11”W each. Provides approximately 35 cubic feet of storage.
Length: 9 feet. Width: 5 feet 4 inches. Height: varies depending upon tire size and lift kit.
Constructed of steel 1/4 inch thick walled 2" x 2" square tubing. The rear bumper is formed 3/16 inch plate steel. All metal CAD-designed and machined, using CNC equipment, then mig-welded and powder-coated.
Fiberglass reinforced with 3/4 inch plywood. The gel-coated tub can be painted white or can be painted to match any vehicle.
Fiberglass reinforced with 1/4 inch plywood. Lifted by gas struts. Five raised ribs add strength, and a powder-coated steel top rack is bolted all the way through the lid.
3,500-pound hubs and bearings on 1,400 lb., or 2,200 lb. Torflex axles are available.
Wheels and Tires
Usually matched to vehicle, though we stock All-Terrain tires w/ Aluminum Alloy Wheels
Tent fabric is urethane-coated polyester and is both fire-retardant and waterproof.
Tent and Bed
Tent opens to a 5' x 8' sleeping area with a 2" thick mattress.
Tongue Jack Adjustable height swing jack mounted to the off road tongue.
Recessed 4-inch round tail lights and Jeep lights are available.
2" x 2" receiver is standard on rear of the trailer for step, bicycle rack, etc.
Large Heavy Duty Awning/Rain Fly 10’ x 14’ covers tent and porch area and is supported by extreme weather Easton 7075 collapsible aluminum poles with over 80,000 PSI of tensile strength.
All trailers can use the Easy-Hitch 2 inch coupler for use with 2" ball.
Lockable Dry Box
Measures 28” L x 18” W x 13” H